Image Credit: Live Auctioneers

I found this interesting box in an online auction for a Harmony Patrician being sold in Florida and figured I'd document it since there appears to be no other reference to it on the internet.

Timi's Studio

Tortoise Shell Originals

Tetuan 200

San Juan, Puerto Rico

Genuine Tortoise Shell

Made In Puerto Rico by Timi's

Image Credit: Live Auctioneers

That was enough information for me to begin my search into trying to find the origins of the business. The Articles of Incorporation for the business through Puerto Rico's website refers to the business as "Timi's Tortoise Shell Originals." 

Image Credit: Puerto Rico - Registry of Corporations and Entities

The business appeared to be owned by John and Margaret Timiriasieff and was established in 1954 and continued operation until 1973 when CITES banned the trade of tortoise shell and the business likely folded. A third founding employee, Julio T. Rodriguez, is also mentioned as owning a single share. 

The business received notices about failure to renew in the 1990s but it took until 2014 for the name to be revoked.

Image Credit: Puerto Rico - Registry of Corporations and Entities

The business name was revoked in 2014.

Mr and Mrs Timiriasieff both passed in the 1990s according to public records. 

Image Credit: Mine

About

The 1930s were the decade of wild experimentation among guitar builders as the depression slowed sales and the art deco movement inspired builders searching for any gimmick to sell a guitar. Hundreds of thousands of guitars were produced with clever paintwork mimicking expensive timbers, non-wood materials, and artistic scenes. This would carry into the 1940s and 50s with the proliferation of stenciled guitars depicting Wild West scenes.

Construction

These rare Kay guitars are most easily identifiable by their unique lyre soundhole shape which some folks may refer to as a harp shape (if they are unfamiliar with lyres as I was). The shape is cut out of the laminated wood top as more of a stylistic decision than one influenced by sound. These guitars are ladder braced. The top is segmented by a painted diamond with a sunburst on the outside and a faux-flame-maple on the inside. 

Two variants of this instrument's headstock exist.

1. Gibson-esque "open book" headstock
2. Harmony-esque "rounded point" headstock 

When Were They Built?

I had a picture of 3 lines of text here from a book on Kay guitars written by Michael Wright which identified the years these guitars appeared in a catalog. Nearly five years after I wrote this article, he threatened to sue me for using that image even with a citation and recommendation to purchase his book. If Michael Wright chooses to wake up and be an asshole to a blogger on guitar history, so be it. 

If you go to the website of the reissue Kay guitars, they have a PDF of the full page that my snippet came from. I will not support this author but I will support those.

Two scans from a 1939 Continental Music Catalog show the No.2091 (with the open book headstock) and a sister model, the No.5400 (with the rounded headstock). The No.5400 has the lyre soundhole but does not have the extensive stenciling. 

The open book headstock profile with the Kay DeLuxe label is a design used by Kay in the 1930s and is gone by '44. The yellow and red label disappeared by the end of the 1930s

Image Credit: Mine

By 1942, the open book headstock vanishes from the lower end models (the K-60 and K-62 still sport it) and the rounded headstock profile takes over.

These Kay guitars lack the lyre soundhole design but have similar stenciling and thus are still representative of the design choices of the factory.

The rounded point headstock shape began, at the latest, in 1938 and continued throughout the 1940s. The blue shield logo can be found in a variety of instruments from the 1940s and is one of the traits to look for when dating an instrument to that era.

Image Credit: VintageGuitar.com

The open book headstock profile and/or  mustard yellow/red label denotes an earlier build of the lyre soundhole series of Kay guitars. The rounded headstock profile and/or a blue label denotes a later build shifting into the 1940s.

Image Credit: Reverb - Rock n Roll Vintage

Masterson guitars were built by Ernest Leroy Masterson (1915-2006) out of Nappanee, Indiana in the 70s [2]. His main job was as a spray painter for kitchen cabinets while employed at Coppes Inc but he also taught guitar and built instruments for extra income [1][3]. 

Image Credit: Reverb - Rock n Roll Vintage

Estate Auction Finds

I stumbled across a 2017 auction in Nappanee, Indiana from the estate of a Mr Robert R Hall through Schrader Real Estate Auctions. These instruments were in his collection and were auctioned off for unknown prices. I found a pdf of a flier advertising this auction where they list the instruments that are for sale in no particular order. 

• Masterson (Nappanee) Indian 6 string electric guitar 
• Electric Wood guitar 6 string
• Encore 6 string child’s Acoustic guitar
• Wood 6 string Acoustic guitar, no brand
• Blueridge 6 string guitar with case
• Electric wood guitar with case
• Rival Hondo Electric 6 string guitar with case
• Standard Masterson (Nappanee) 6 string Electric guitar 
• Hondo 2 Electric guitar with case
• Masterson (Nappanee) Base guitar with case (Blue) 

Schrader Auction Flier [4]

• The light blue Fender P-bass copy is the only bass guitar in the flier and is mentioned by color so we can confirm it is a Masterson build.
• The middle instrument is a Hondo II semi-hollow Gibson copy which can be distinguished by the headstock and tailpiece and matches the flier's mention of a Hondo II.
• The naturally finished Gibson Les Paul copy has a brand but is unreadable. Possibly a Masterson build

Image Credit: Schrader Real Estate Auctions

There are now two more instruments:

• A Fender Stratocaster copy in natural. It has a brand but it is unreadable.
• A homebuilt body with a Stratocaster-styled neck.

The Stratocaster copy looks most like something that Ernest Masterson would build since his body designs closely followed contemporary instruments.

Image Credit: Schrader Real Estate Auctions

Next we have three acoustics and an electric guitar.

• The leftmost instrument is the Blueridge acoustic as it looks professionally built and like a typical generic acoustic.
• The second from left appears to be a homebuilt instrument but looks too sloppy to have been built by Masterson. 
• The second from the right is a Japanese guitar which I can identify by the "steel reinforced neck" sticker where the truss rod cover should be and matches the flier for an "Encore childs guitar"
• The guitar on the far right is an Electra which were made for St Louis Music out of Japan. I can recognize the headstock logo and the body shape.

• 

  Image Credit: Schrader Real Estate Auctions

Finally the flier mentioned a "Rival Hondo" and there was a picture of a Gibson ES-335 copy, I dug and discovered the Hondo "Revival" line of instruments including that instrument so I won't include the photo here. Not a Masterson build.

Other Examples

On the internet, I've seen a few references to his instruments and that he used to teach guitar lessons [3]. All the information has been from locals of the town which implies that he didn't ship his instruments out across the US but that he kept them local.

Sources

[1] https://coppescommons.com/2018/12/13/a-look-back-at-the-onion-festival-parade/

[2] https://www.findagrave.com/memorial/118935523/ernest-leroy-masterson

[3] http://www.guitarists.net/guitar_forum/view_bb.php?forum=2&thread=102370
[4] http://www.schraderauction.com/files/2017-501/Hall_Blank.pdf

First I started with a blank of Indian Rosewood which had came from a beam that I bought, ripped into bridge blanks, and waxed the ends to prevent splitting. I took the original, fragile, ebonized wood bridge and traced an outline onto the block with a pencil. Then I used a knife to score along the lines to help make them more visible. 

I took the bridge to my bandsaw to rough cut along the marked lines and start on removing the material for the gap underneath the bridge. I also cut and sanded the bridge to the desired thickness of just a hair under 1/4". At this point I also marked the points on the bottom of the bridge where my screw posts are to be located. Then I placed the bridge upside down on my drill press and drilled both holes through the bridge stopping just short of going through the bridge as I don't want them to be visible through the top

Then I began to round off some of the corners, remove most of the wood for the bottom gap, and start to shape the bottom of the bridge to the top of my guitar. I shape the bridge to the guitar by placing a sheet of 80 or 120 grit sandpaper on the top, holding it in place, and running the bridge back and forth across it lengthwise. That removes just the right amount of material so the bridge fits perfectly on the top which helps transfer energy and resists side to side moving. I also run the bridge on my belt sander to start tapering the long edges towards the top like an isosceles trapezoid. 

Then I separated the pieces of the bridge by running it through my bandsaw. Notice the screw holes are perfectly aligned because I drilled before cutting the bridge. I've also begun to rough out the compensation for the strings and tapering the bridge even stronger towards the top to form a point

I've oiled the wood and begun to polish it to a shine starting with 220 grit and ending with 3000 grit dry sandpaper. While still in the rough grits, I lightly dampen the wood with water to raise the grain and sand it off to help achieve a super smooth finish. Then I begin adding oil by rubbing it on then off while continuing to sand. Rosewood takes oil very well and can be polished to a point where it looks shiny.

I use Dr Ducks Axe Wax for this purpose and general maintenance of my guitar fretboards

Here is the bridge sat atop my Harmony Rocket. I used the thumb wheels from the old bridge and some screw posts that I had lying around. Harmony anchored their posts into the top half of the bridge which I don't much like so I reversed it and anchored my posts into the base of the bridge, as is more common. This Indian Rosewood is pretty dark so I think it will match the Brazilian Rosewood fretboard quite well while also being a large structural improvement over the brittle, ebonized bridge.

1953 Advertisement from the St Louis Post Dispatch
Newspapers.com

Hugo Music Center

Hugo Music Center was situated at 5889 Easton Avenue at the intersection of Hamilton Boulevard. You cannot find Easton Avenue today because in 1972 it was renamed to Dr Martin Luther King Jr Drive [1]. The building no longer stands as of 2019, likely from a fire in 2016 [5].

Image Credit: Google Maps

I was only able to find legal documents for Hugo Music Inc which was created in 1959 by a Mr Victor E Hugo Jr. Advertisements and other documents point to the business existing for around 10 years prior so this online document might not be the most accurate representation. The business was dissolved in 1971 due to a failure to register the business again so we can assume it had folded no later than that date [2]. 

Image Credit: Missouri Online Business Search [2]

According to public records, Mr Hugo passed away in 2002 at the age of 74 [4].

Fulltone

They sold instruments under the "Fulltone" brand like this 1949 Supro-built lap steel.

1949 Lap Steel. Image Credit: Craigslist

Notable Instruments

According to a forum post on MyLesPaul.com, a 1959 Burst was sold through Hugo Music Center and was attributed by the badge on the original case [3].

Image Credit: [3]

Sources

[1] https://www.stltoday.com/news/archives/life-along-martin-luther-king-drive-from-its-early-days/collection_bd94cab9-8921-585f-8b80-ef4d96e239e5.html#1

[2] https://bsd.sos.mo.gov/BusinessEntity/BESearch.aspx?SearchType=0

[3] https://www.mylespaul.com/threads/burst-case-logo.399764/#post-8408830

[4] https://www.truepeoplesearch.com/results?name=VICTOR%20E%20HUGO&citystatezip=st%20louis%2C%20mo&rid=0xl

[5] https://www.stltoday.com/news/archives/life-along-martin-luther-king-drive-from-its-early-days/collection_bd94cab9-8921-585f-8b80-ef4d96e239e5.html#43

What was Sunny Shields Music Studio?

Charles "Sunny" Dwight Shields (1917-2001) led an orchestra during the late 1930s and up until he served in the Army during World War II [5][11]. He then founded his business, Sunny Shields Music Inc (commonly misspelled as Sonny) in East St Louis, Illinois during the 40s [1]. His business first appears in the papers in 1948 [13].

Moberly Monitor-Index issue from 1937 [11]

[12]

In order to facilitate the teaching of students on guitar, he ordered custom branded instruments to be used by and eventually sold to his students.

St Louis Post Dispatch 1953 [8]

The main office appeared to be located at 1409 State St. East St Louis, Illinois until 1967 when they moved to 402 Missouri Ave. East St Louis, Illinois [9]. The building on State Street still stands but the building on Missouri Avenue has since been demolished.

[7]

In 1956 they boasted 18 years of experience, fifty-thousand lessons in the previous year, 50 instructors, and thousands of students each year as they expanded into Alton, Illinois

The above 1968 advertisement from The Edwardsville Intelligencer on March 4th shows that he had locations in Belleville, Cahokia, Collinsville, Columbia, East St. Louis, Prairie du Rocher, Waterloo, Edwardsville, Granite City, Highland, Millstadt, New Athens, and Red Bud. He offered lessons in Spanish guitar, organ, drums, Hawaiian guitar, piano, and accordion [6]. 

Media

A gentleman from Russia named Emir Shabashvili (username: emirko) purchased an old Kodak Bullseye Brownie camera and found undeveloped film which he had developed and scanned [2]. These rare pictures appear to be the only surviving media showing the Sunny Shields Music Studio and the kids who were enrolled. What confirms the photo's origins are the multiple Epiphone guitars visible in the photo with "Dwight" written on the headstock.

Other visible instruments include a Gibson Melody Maker, Kay Value Leader, Gibson ES-125, two Gibson ES-335's, and a Rickenbacker bass.

Photo #1 [2]

Photo #2 [2]

Photo #3 [2]

Photo #4 [2]
A store counter with a Schaum and a Gibson string display

Who made Dwight instruments?

There is a contemporary manufacturer, Clive Brown, who builds Gibson replicas in England and currently owns the rights to the name "Dwight" [14]. His instruments are not related in any way to these Dwight instruments and so they must not be confused.

Epiphone

According to The Official Vintage Guitar Magazine Price Guide 2010, Epiphone built solid body Coronet models, labelled them "Dwight", and shipped them to Mr Shields. There were 75 built in 1963 and 36 built in 1967 for a grand total of 111 Epiphone guitars [3].

Supro

Valco-built instruments, aka Supro, were also purchased by Mr Shields. He acquired an unknown quantity lap steels during the 50s and 60s [3]. They come up more frequently than their guitar counterparts so we can assume that he purchased more lap steels than guitars.

left: 1959 Supro Belmont branded Dwight on the guard

Image Credit: Reverb - Southside Guitars

right: Supro Belmont that I believe is the same instrument

Notice the placement of the Dwight logo on the guard and the pearloid body

Image Credit: Photo #3 (from above)

All the Supro-build guitars appear to be the Belmont models and were built from 1959-1960. They can have the branding on the headstock, the pickguard, or the upper bass side bout. 

1960 Supro Belmont (T29479) branded Dwight
Image Credit: Myself

1960 Supro Belmont branded Dwight on the upper bout
Image Credit: Myself

Existing Examples

These are all the Supro-built Dwight guitars that I can find with their serial numbers, color scheme, and last known sightings. 

1. T18984 - Red Pearloid - Reverb - Southside Guitars
2. T29479 - Red Pearloid - Driftwood Music
3. T32770 - Red Pearloid - Private Collection 
4. T48739 - Red - Ebay - Rocket City Guitars
5. T57745 - Red - Guitar Database Wiki
6. ? - Red - Pulse Beat Guitars
7. ? - Red - Youtube - Billy Barnett
8. ? - Red - Commenter on above video claims to have one
9. ? - Red - Private Collection (FB-JK)

PulseBeatGuitars.com claims that Keith Richards owns a white Supro Dwight and is pictured with it but I researched the photo and the original website claims it is a "Supro Dual Tone" with no mention of "Dwight" [15]. I can find no evidence to support the claim that his model is branded Dwight or that the Dual Tone model ever bore such branding.

Accordions

Dwight accordions were imported from Italy for his students.

Ebay [10]

Amplifiers

Dwight branded amplifiers were built by Epiphone and are branded versions of typical Epiphone products.

Image Credit: Reverb - Acme Guitars

Sources:

[1] http://jedistar.com/dwight-guitars/

[2] https://web.archive.org/web/20191002135337/https://pbase.com/amirko/ff_bulls_eye_brownie

[3] https://books.google.com/books?id=o_SLwpadkxgC&pg=PA49&dq=sonny+shields+music&hl=en&sa=X&ved=2ahUKEwiUrZ3e3v3kAhXPsJ4KHTYIBzMQuwUwAHoECAEQBA#v=onepage&q=sonny%20shields%20music&f=false

[4] https://www.pulsebeatguitars.com/html/1960s/1960_Dwight.php
[5] https://www.newspapers.com/image/521062753/
[6] https://www.newspapers.com/image/26426481/
[7] https://www.newspapers.com/image/291763/
[8] https://www.newspapers.com/image/140011094/
[9] https://www.newspapers.com/image/142289982/
[10] https://www.ebay.com/itm/Dwight-Accordion-Made-in-Italy-Gold-Mother-of-Pearl-w-Case-120-Basses-/323761125782
[11] https://www.newspapers.com/image/34765863/?terms=%22sunny%2Bshields%22
[12] https://www.newspapers.com/image/26541026/?terms=%22sunny%2Bshields%22
[13] https://www.newspapers.com/image/139256415/?terms=%22sunny%2Bshields%22
[14] http://rockbeareguitars.com/electrics/dwight/dwight-eliminator/
[15] https://www.myrareguitars.com/frankfurt-musikmesse-2008-is-a-hit

This is a Harmony H-1422 which was branded as an S.S. Stewart model 7004 for distribution by Buegeleisen & Jacobson. As of the authoring of this article, H-1422 does not exist in the DeMont Harmony Database and only a few examples appear on the internet.

This particular instrument has a floral decal applied to the upper bass bout which I inspected closely and determined to be quite old. Whoever placed it there did so a very long time ago and must've lacquered over it because it exhibits checking. Was it a special order from the factory? Can't really know but its definitely not a recent addition. Unfortunately the instrument was oversprayed and polished so its glossy but there are some visible drips on the sides and the original nitro lacquer is hiding beneath. It was done adequately so I have no intention of trying to remove it.

Age

This instrument does not have a visible date stamp within the body so any dating will have to be done through what I can observe and what I can compare against.

1940 B&J catalog scan showing a similar model Harmony instrument removed

after threat of legal action by VintAxe.com who claim to be the owners of the copyright to

this B&J catalog.

The tuning machines are Waverly and I have the exact set on a 1936 Harmony I own (confirmed via date stamp).

The fretboard has two slots cut in it which are visible from the dovetail and the nut which I believe are to accommodate two steel reinforcing rods running parallel down the neck. The neck is also extremely responsive to magnets, more so than my other guitars that I know have a single bar. My theory is also supported by a 193(6 or 8) Harmony Supertone, which I owned, that had two parallel steel reinforcing rods.

Construction

The neck is very light colored mahogany, steel reinforced, and with grafted headstock wings. The fretboard is a slab of gorgeous Brazilian Rosewood with the typical 1-2-1-2 inlay dot pattern. The frets were small, vintage-style and terribly worn so I replaced them for my restoration.

The back and sides are solid Mahogany and the top is also solid Mahogany. A typical, winning combination for a pre-war archtop from Harmony.

The top has the typical parallel tone bar bracing that you'd expect to find on an archtop from this era but the back has ladder bracing like a flat top. I've seen that back bracing on a 1930s Kay-built Old Kraftsman and believe it indicates a solid wood back.

Markings

Model No 7004

Serial No 2633

4187H1422